The plumber fixed the pipe. The electrician ran the wire. Now there’s a hole in your wall or ceiling that needs to look like it was never there.
When trade crews cut into walls or ceilings for access, they fix what they came to fix and leave. The drywall is your problem. Precision Patch Pros closes those holes, matches the texture, and finishes the surface so the repair disappears.
Text us photos + your city and we’ll tell you what it needs and what it costs – usually within 10 minutes.
We protect your floor and furniture
We leave your home spotless
5-Year guarantee on our work
Licensed and insured
CSLB License #830875
Fill in the form or text with 2-3 pictures (optional) to get your quote in 10 minutes.
Based on 41 reviews
Homeowners and trade contractors leave us 5-star reviews because we show up after the pipe or wire is fixed, close up the hole properly, match the texture, and leave the ceiling or wall looking like the access cut never happened.
When you hire an electrician to rewire your kitchen or a plumber to find a hidden leak, they focus on their craft which often means cutting into your walls. They leave with the pipes fixed, but leave you with a mess of dust and gaping holes.
At Precision Patch Pros, we specialize in the “final step.” We bridge the gap between a completed repair and a home that looks like new again. Our team handles the precision framing, patching, and texture matching required to make those trade access holes completely invisible.
Our goal is simple
Hole sizes vary from 6 inches to a full section replacement. We handle all of them.
A clean, invisible repair on a trade access hole depends on how it was cut and what’s backing it. Here is how we typically handle the restoration:
We install internal backing inside the wall, hang the patch, tape the seams, float, and texture match. This is the standard, most common scenario.
If the opening is jagged or spans a large area, we frame out the opening, hang new drywall, tape and float all seams, and texture match the full section to ensure structural stability.
If there are several access points in one area, we treat them as a single section. This results in a much cleaner finish and is usually more efficient than patching each hole independently.
If you’re a trade contractor looking for a reliable drywall crew to finish behind your work, we’re set up to do exactly that. We can schedule quickly, match any texture, and leave the job looking clean for your customer.
Text us directly at (661) 706-3565. Include job address, number of holes, and your best guess at the texture type. We’ll get back to you fast.
Want the fastest answer?
Fastest way to get a number: text 3 photos, a wide shot of the room, a close-up of the texture, and a shot showing the ceiling height. Include your city.
We specialize in the “final mile” of home repair. Our team steps in to erase the evidence of trade work, ensuring you don’t have to look at a temporary plywood cover or a gaping hole for another day.
Your safety is our top priority during the removal process.
Here’s what you can expect:
We mask floors, furniture, and fixtures before any cutting or sanding starts.
We feather repairs wide so they disappear under ceiling and wall lighting.
Every patch gets proper backing. A floating patch without support will crack over time.
Texture is tested and applied to match what’s already on the wall or ceiling – not just close, but matched.
We tell you when spot paint will work and when blending the section is the cleaner result. We can paint as part of the job.
Based on 41 reviews
Here are a few common situations where we repair damaged
popcorn ceiling with finish that you like.
After multiple rounds of cutting and patching due to a persistent plumbing leak, we provided the permanent fix once the pipe was finally secured. We cleaned up the opening, installed sturdy backing support, and hung fresh drywall before floating the patch flush and matching the original texture for a seamless, worry-free finish.
After a series of lighting and electrical repairs left holes in the family room, we stepped in to patch the damage and fix a pre-existing issue where the original ceiling finish exposed every old seam. We skim-coated the entire ceiling to create a perfectly uniform surface, applied a fresh texture, and finished the project by painting the entire room for a complete refresh.
Following a full plumbing repipe in this historic home, we cleaned up the rough access cuts in both the bathroom and laundry room. We installed secure backing, hung new drywall, and handled the taping and floating before applying a matching texture and painting both rooms completely. To wrap up the project, we also repaired and blended a matching stucco patch over the exterior plumbing access hole.
To patch this classic plumber’s cutout, we cleaned up the rough edges and installed secure backing support. We then hung fresh drywall, taped the joints, floated the patch flush, and completed the job with a precise texture and paint touch-up for a flawless finish.
For all your drywall needs in Kern County, Antelope Valley & High Desert, Santa Clarita Valley, San Fernando & Verdugo Foothill Areas, and Tulare & Porterville Areas – Precision Patch Pros delivers exceptional results.
Contact us today for a free estimate and let us transform your space!
Find quick answers below to help you get your home back to a smooth, seamless finish.
Yes. Knockdown, orange peel, smooth, skip trowel, Santa Barbara finish – send a close-up photo and we’ll match it.
Usually same-day or next-day for most locations. Text us when the work is done and we’ll tell you how quickly we can schedule.
Yes, but we can’t start until the hole is clear and ready. We’ll confirm before we show up.
Yes. If you have ongoing work, we can set up a regular arrangement. Text or call us to talk through the details.
Yes. We can prep and paint the repaired area as part of the job.
